The
Biologic™ ZorinPump is an ingenious
combination of a seat-post and powerful floor-pump.
The pump is always at hand, hidden from the
elements and thieves, and can inflate a tire
in a few strokes!
You stand while you pump and use the saddle
as a handle, so say good-bye to kneeling in
the dirt with a mini pump that will give you
an arm cramp before your tire is filled and
ready to ride.
|
|
 |
-
Modern, award winning design
-
Lightweight (only 100g more than a conventional
seat-post)
-
Attention to build-quality to eliminate rattling
during transit
-
Efficient pump mechanism
-
Ergonomically correct; comfortable to use
-
Protected from the elements when stored
-
Compatible with Schrader and Presta valves
-
Inconspicuous (stored in frame)
-
High inflation rate
-
High obtainable pressure
-
No permanent installation required
-
Available in different sizes to suit different
bikes
-
100% serviceable
-
Cannot forget to take it with you!
|
_____________________________________________________________
|
| _____________________________________________________________
|
Laser-etched
graphics on the outer wall are the only give away
that this is no ordinary seat-post.
After
it is removed from the bicycle, the pump is accessed
by pushing against, and then rotating the lower assembly.
This releases the spring-loaded locking mechanism
that holds the upper and lower parts of the pump together.
A
small aperture in the lower body is designed to assist
air-hose egress. The user then attaches air-hose to
bicycle inner-tube valve. The standard connection
is for schrader-type valves, although a presta adaptor
is also supplied*.
*
exact specifications may vary in different regions
Once
the pump is attached, the foot-stand is secured in
place, and by taking hold of the saddle, the user
pushes up and down to operate the device in exactly
the same manner as a floor (stirrup) type air-pump.
You are able to exert significant force on the pump
in a controlled and comfortable manner.
|
The
internal design of the pump is intended to optimise
efficiency and attain high pressure. Apart from
the considerable swept volume of air-per-stroke,
ZorinPump has an ingenious air-flow system which
isolates pressurised air at the end of each
stroke between the piston-head and the inner-tube
valve.
Locking
screws can be released to enable full access
to internal working parts. Periodic maintenance
of the pump is therefore made possible, as is
the replacement of individual pump seals if
required.
As
a result of being located within, and protected
by the bicycle seat-post tube during transit,
ZorinPump is not affected by mud and dirt that
collects on the bicycle frame. This can be a
problem for conventional hand-held pumps where
dirt gets into the internal workings and inevitably
reduces the integrity of the seal.
For more information about ZorinPump specifications
and availability in your country, please click
here. |
_______________________________________________________________________
|
|
|
|
| 1.
remove ZorinPump from bike frame |
2.
open footstand and air-hose |
3.
attach to tire-valve and pump away! |
_______________________________________________________________________ |
|
Biologic
ZorinPump Movie!
Another Biologic ZorinPump
comes off the Dahon production line and is put
to the test! Click on the image to see ZorinPump
in action.
The movie will
be opened in a new window. You may need to enable
pop-ups in your browser settings to watch the
movie. |
^Go to top of page
|
